JOURNAL PUBLICATIONS

  1. Iqbal, J., Chang, Y. P., and Qatu, M. S., 2010, “Transverse vibration of multi-segment shaft system joined with multiple hinges,” accepted to be published in International Journal of Vehicle Noise and Vibration.
  2. Chang, Y. P. and Her, I., 2008, “A Virtual Cam Method for Locating Instant Centers of Kinematically Indeterminate Linkages,” ASME Journal of Mechanical Design, June 2008, Volume 130, Issue 6, 062304, 7 pages.
  3. Iqbal, J., Chang, Y. P., and Qatu, M.S., 2008, “Optimisation of Frequencies of a Two-Span Shaft System Joined With a Hinge,” International Journal of Vehicle Noise and Vibration, Vol. 4, No. 4, pp.317–338.
  4. Samala, P. R., Bis, R., Chang, Y. P., and Yang, L., 2007, “Residual Strain Measurement on Betabrace-Based Composite Material by Digital Shearography,” Society for Experimental Mechanics, Experimental Techniques, Vol. 31, Issue 2, March/April 2007, pp. 20–27.
  5. Chang, Y. P., 2006, “Tyre Vertical Transmissibility Transient Response Analysis,” International Journal of Vehicle Noise and Vibration, Vol. 2, No. 3, pp.191–208.
  6. Sirafi, M., Chang, Y. P., and Qatu, M. S., 2006, “Robustness of Mount Systems for Idle NVH, Part I: Centre of Gravity (CG) Mounts,” International Journal of Vehicle Noise and Vibration, Vol. 2, No. 4, pp.317–333.
  7. Sirafi, M., Chang, Y. P., and Qatu, M.S. 2006, “Robustness of Mount Systems for Idle NVH, Part II: Pendulum Mounts,” International Journal of Vehicle Noise and Vibration, Vol. 2, No. 4, pp.334–340.
  8. Chang, Y. P., and Zhang, W., 2006, “Radial-Ply Tire’s Three-Dimensional Transmissibility Analysis,” SAE paper number 2006-01-0498, SAE 2006 Transactions Journal of Materials and Manufacturing, V115-5, pp 408–418.
  9. Chang, Y. P. and El-Gindy, M., 2005, “Virtual Prediction of a Radial-Ply Tire’s In-Plane Free Vibration Modes Transmissibility,” International Journal of Automotive Technology, Vol. 6, No. 2, pp. 149–159.
  10. Chang, Y. P., El-Gindy, M., and Streit, D. A., 2004, “Literature Survey of Transient Dynamic Response Tyre Models,”International Journal of Vehicle Design, Vol. 34, No.4, pp. 354–386.
  11. Chang, Y. P., El-Gindy, M., and Streit, D. A., 2003, “Influence of Tyre Loading and Inflation Pressure on Standing Waves Phenomenon Using PAM-SHOCK,” International Journal of Heavy Vehicle Systems, Vol. 10, No.1/2, pp. 86-111.


TECHNICAL CONFERENCE

  1. Wu, D., Chang, Y. P., 2010, “Simulations and Studies on a Double Transition Shift Transmission,” accepted to be published and presented in 2010 SAE Commercial Vehicle Engineering Congress Conference, October 5-6, 2010, Rosemont, Illinois, USA.
  2. Wu, D., Chang, Y. P., 2010, “Modeling and Simulation of Double Transition Shift Transmission,” accepted to be published and presented in 2010 IEEE Vehicular Technology Conference (VTC 2010), Sep. 12-15, 2010, Ottawa, Ontario, Canada.
  3. Wu, D., Chang, Y. P., and Zhang, Y., 2009, “Dynamic Analysis and Simulation of Driveability and Control of a Double Transition Shifting System,” published and presented in IEEE VPPC 2009 Vehicle Power and Propulsion Conference, September 7-11, 2009, Dearborn, Michigan, USA.
  4. Chen, D., Song, Y., Chang, Y. P., and Palmer, T., 2009, “Study of an AWD Sedan Rear Subframe load Prediction using Virtual Proving Ground Simulation,” SAE Paper Number: 09M-0311, presented in 2009 ASE World Congress Conference, Detroit, April, 2009.
  5. Iqbal, J., Qatu, M. S., and Chang, Y. P., 2008, “Frequencies of A Two Span Shaft System Joined With A Hinge Using Exact Solutions,” published and presented in NOISE-CON 2008 Conference, July 28-31, 2008, Dearborn, Michigan.
  6. Chang, Y. P., 2007, “Radial-Ply vs. Bias-Ply Tire’s Transmissibility,” SAE Paper Number 2007-01-1513, published and presented in 2007 SAE World Congress Conference, Detroit, April, 2007.
  7. Chang, Y. P., and Zhang, W., 2006, “A Radial-Ply Tire’s Three-Dimensional Transmissibility,” SAE paper number 2006-01-0498, published and presented in 2006 SAE World Congress Conference, Detroit, April, 2006.
  8. Shahidi, B., Chen, D., Stuhec, U., Song, Y., Chang, Y. P., and Palmer, T., 2005, “Correlation of Explicit Finite Element Road Load Calculations for Vehicle Durability Simulations,” SAE Paper Number: 05M-242, published and presented in 2005 ASE World Congress Conference, Detroit, April, 2005.
  9. Chang, Y. P., 2003, “Virtual Detection of A Radial-Ply Tire's Three-Dimensional Free Vibration Modes Transmissibility,” Paper Number: IMECE2003-42833, ASME WAM, VDC Symposium "Advanced Vehicle Technologies," Proceedings of IMECE’03, 2003 ASME International Mechanical Engineering Congress & Exposition, November 15-21, Washington, D.C. Also published in Transportation: Making Tracks for Tomorrow's Transportation, 2003, pp. 129-135.
  10. Chang, Y. P., and El-Gindy, M., 2002, “FEA Rotating Tire Modeling for Transient Response Simulations,” Paper Number: IMECE2002-33200, ASME WAM, VDC Symposium "Advanced Vehicle Technologies," Design Engineering Division (Publication) DE, Vol. 115, 2002, pp. 93-101. Proceedings of IMECE’02, 2002 ASME International Mechanical Engineering Congress & Exposition, November 12-17, New Orleans, Louisiana.
  11. Henty, M., El-Gindy, M., and Chang, Y. P., 2002, “Virtual Rollover Tests Using PAM-CRASH,” Worldwide Conference and Exhibition on Numerical Simulation for Virtual Prototyping, Virtual Manufacturing and Virtual Environment, November 6, Detroit, Michigan.
  12. Chae, S., Chang, Y. P., El-Gindy, M., and Streit, D. A., 2001, “Standing Wave Prediction of a Racing Car Tire,” International Conference on Multidisciplinary Design in Engineering, CSME-MDE 2001, November 21 - 22, Concordia University, Montréal, Québec, Canada.
  13. Chang, Y. P., El-Gindy, M., and Streit, D. A., 2001, “Prediction of a Radial-Ply Tire’s Vertical Free Vibration Resonance Using PAM-SHOCK,” Third North American Conference and Exhibition on Numerical Simulation for Virtual Prototyping, Virtual Manufacturing and Virtual Environment, October 24 - 25, Detroit, Michigan.
  14. Chang, Y. P., El-Gindy, M., and Streit, D. A., 2000, "Prediction of Tire Standing Waves Using PAM-SHOCK," Second North American Conference and Exhibition on Numerical Simulation for Virtual Prototyping, Virtual Manufacturing and Virtual Environment, October 24 - 25, Detroit, Michigan.
  15. Chang, Y. P., El-Gindy, M., and Streit, D. A., 2000, “High Speed Predictions,” Tire Technology International, UK, Dec., pp. 20-23.
  16. Chang, Y. P., El-Gindy, M., and Streit, D. A., 2000, “FEA: The next generation,” Tire Technology International, UK, Mar., pp. 36-39.
  17. Chang, Y. P., and Tsai, Y. C., 1992, "Continuation Method Applications on Planar Mechanisms Dimensional Synthesis Problems,” Proceedings of 23rd CSME Conference, May 4-7, Taiwan, pp. 67 – 75.


EDUCATION CONFERENCE

  1. Kobus, C. and Chang, Y. P., 2009, “Uniform Standard for Teaching Foundational Principles in Statics, Energy Perspective,” published and presented in 2009 ASEE (American Society for Engineering Education) North Central Section Conference, April, 2009, Grand Valley State University, Grand Rapids, Michigan, USA.
  2. Chang, Y. P., 2008, “A Unique Horizontal Shaft/Slider Apparatus Capstone Design Project for a Hands-On Senior-Level Laboratory Design Experience,” published and presented in 2008 Annual ASEE IL/IN Section Conference, April, 2008, Rose-Hulman Institute of Technology, Terre Haute, Indiana, USA.
  3. Chang, Y. P., 2008, “A Pendulum Impact Apparatus Capstone Design Project for a Hands-On Senior-Level Laboratory Design Experience,” published and presented in 2008 Annual ASEE IL/IN Section Conference, April, 2008, Rose-Hulman Institute of Technology, Terre Haute, Indiana.
  4. Oakley, B, Smith, L., and Chang, Y. P., 2007, “The Untapped Student Goldmine,” paper number AC 2007-243, published and presented in 2007 ASEE Annual Conference & Exposition, http://www.hope.edu/academic/engineering/aseetlcc/2007conf.htm, June 24-27, 2007, Honolulu, Hawaii, USA.
  5. Chang, Y. P., 2006, “A Unique String/Pulley System Apparatus Capstone Design Project for a Hands-On Senior-Level Laboratory Design Experience,” published and presented in 2006 ASEE Illinois-Indiana and North Central Joint Section Conference, March 31-April 1, 2006, Indiana-Purdue University Fort Wayne, Indiana, USA.
  6. Chang, Y. P., 2006, “A Slider/Ramp Apparatus Capstone Design Project for a Hands-On Senior-Level Laboratory Design Experience,” published and presented in 2006 ASEE Illinois-Indiana and North Central Joint Section Conference, March 31-April 1, 2006, Indiana-Purdue University Fort Wayne, Indiana, USA.

To get Adobe Acrobat click below
Click here for Courses Offered